28
• CONNECTION BY SOFT RUBBER
We do not recommend this type of connection.
To be reserved solely for old installations not enabling any other option
Screw the compliant end piece
(2)
Butane/Propane
Natural
(2)
In all cases, make sure the seal is fitted. Following the connection operations,
test the leak tightness using soapy water, testing by flame is strictly prohibited.
by-pass screw
hob burner
Never loosen the
others screws !
REGULATION OF THE MINIMUM FLOW
If the gas type has been altered, the stability of the flame in the minimum flow must be
checked and set by adjusting the by-pass screw.
1. the hob : to access the top burner by-pass screw, remove the control panel knobs.
At first, pull the disc to the front and remove the combined control knob.
a) Natural gas :
. unscrew the bypass screw one turn,
. replace the combined control-knob, light the burner and set to low flame,
. remove the combined control-knob again, screw the by-pass screw until a reduced flame
is obtained, staying stable when going from high to low position.
. Replace the combined control-knob.
b) butane- propane gas : the setting is done by screwing right in (without forcing) the by-
pass screw whose calibrated hole provides the minimum flow.
!
Fit the soft tube to the end piece
on the one hand and to the
regulaotr or to the valve outlet
on the other hand.
INSTALLATION : SETTING THE IDDLE FLAME
Summary of Contents for CGE 650 S
