3
Arm/Bypass
22
Automatic (Timed)
Arming
Interior armed _X_
Perimeter armed _X_
Exit allowed _X_
Requires user code ___
Automatically arms _X_
No entry allowed ___
Your system can automatically
arm itself at preset times of the
day.
At two minutes and again at one
minute before the Automatic
Arming sequence begins, the
siren sounds. Then, the exit de-
lay begins. You must leave the
building during the exit delay, or
an alarm sounds.
You can postpone the Auto-
matic Arming sequence by one
hour. When the siren sounds
two minutes before arming oc-
curs, press the
key,
then enter your user code.
You can change the days that
Automatic Arming occurs by
following the procedure to the
right. To stop Automatic Arm-
ing, turn off all of the Automatic
Arming days. To change the
times that arming occurs, con-
tact your installer.
To Change Automatic
Arming Days:
1.
Press and hold the
[walk test] key for 2 seconds
until you hear two beeps.
Enter the master user code.
2.
Press the
key
six
times
until you see the fol-
lowing:
1 2 3 4 5
6 7 8
3.
Press the
key. The
zone LEDs light to indicate
the days when Automatic
Arming occurs. The zone 1
LED represents Sunday, etc.
A lit LED means arming oc-
curs on that day.
4.
Press the number of the
day(s) you wish to switch on
or off. To exit, press the
key.
Summary of Contents for Sierra
Page 1: ...Using Your Security System With LED Keypad S5030 S5031 S5032...
Page 64: ...60 8 Notes Notes...
Page 65: ...61 8 Notes Notes...
Page 66: ...62 8 Notes Notes...
