Candela VelaShape, Instruction Manual, Page: 31 / 60

Defining the Treatment Mode
The VelaShape II system has three treatment modes that can be controlled by the operator.
They are based on the following integrated technologies:
• Infrared (IR) light energy
• Radio frequency (RF)
• Mechanical manipulation (Vacuum)
Before you begin treatment, you need to define the levels of the three treatment modes.
The operator panel is located on the top of both applicators. The operator panel consists of
three treatment mode buttons and informational display LEDs.
Each button on the operator panel applies a different treatment mode, as follows:
Table 1: Operator Panel Buttons and Indicators
Button Treatment Mode Description
Photon Lights
RF Mode
Vacuum Mode
Continuous infrared light energy is applied
Radio frequency current is applied
Pressing this button activates the vacuum
pump
Copyright 2020 Product Guide. All Rights Reseved