Candela VelaShape, Instruction Manual, Page: 29 / 60

Copyright 2020 Product Guide. All Rights Reseved
‚ ‘— 
This chapter will assist you in operating the system for the first time, and will guide you through
the initial setup procedures needed to perform in order to start operating the system.
Caution
The VelaShape applicators and disposable covers are not compatible with the older
VelaShape systems or VelaSmooth systems!
Activating the System
1. Before turning the system on, verify that the power cable is connected to the power
connection port on the system's rear panel and to the wall power outlet.
2. Verify that the software plug is inserted and secured.
Warning
• High voltage is present inside the system. Always be aware of the possible dangers and take
proper safeguards as described in this manual.
• Always turn the system off before connecting/disconnecting an applicator or Connector.
3. To activate the system turn the key clockwise; the system initiates a self-test. During this test,
the LEDs on the applicators' operator panels perform a test pattern, and when the first row of
lights (Level 0) is illuminated continuously on both applicators, the system is ready for operation.
At the same time, the communication terminal will display this message: System Initialization
Please Wait…
Note
• Before activation, remove the protective covers from the applicators and install new working
covers.
• When the system is not being used, install the protective covers in order to protect the
applicators' internal components.