Candela VelaShape, Instruction Manual, Page: 25 / 60

11. Hook the Vcontour applicator's umbilical harness into one side of the harness loops on the
umbilical support mast.
12. Place the Vcontour applicator in its cradle.
13. Connect the Vsmooth applicator to the second connection port of the dualconnector, making
sure that the electronic and vacuum sockets are aligned.
14. Hook the Vsmooth applicator's umbilical harness into the other side of the harness loops on
the umbilical support mast.
15. Place the Vsmooth applicator in its cradle.
Finish the installation:
16. Connect the power cable to the power connection port on the system's rear panel, and plug
the cable into the appropriate electrical outlet.
17. Refer to Figure 11 and ensure that all system components are correctly assembled.
18. Insert the key into the keyswitch.
Note: If the system has been removed from cold storage, allow it time to warm up to room
temperature (15-30°C/59-86°F) before first activation.
Copyright 2020 Product Guide. All Rights Reseved
9. Connect the terminal's communication cable to the connection port on the system's rear
panel.
Note: The system may be operated without the communication terminal if desired.
10. Unpack the applicators; firmly connect the Vcontour applicator to one of the dual-
connector's connection ports, making sure that the electronic & vacuum sockets are aligned.