CanadaDocks-Assembly-Instructions-Ver17 08/08/19
Manufactured by: CanadaDocks Inc. 3690 Adjala-Tecumseth Townline RR2 Beeton, ON, Canada L0G 1A0 | 1-877-434-0359 | www.canadadocks.ca
|
“Do-It-Yourself”
Aluminum Docks
Canada
Docks
TM
Canada
Docks
.
ca
TM
Page 12
A
B
THRUFLOW™ DECKING
If using ThruFlow™ Decking please follow ThruFlow™ Decking instructions in
ThruFlow™ package or at
www.canadadocks.ca/assembly-instructions
ThruFlow™ polypropylene decking will make the dock lighter (compared to
wood) and will prolong the lifetime of the maintenance free product.
4x8 Dock Sections
WOOD DECKING
If installing wood decking - see additional instructions in at
www.canadadocks.ca/assembly-instructions
NOTE: Check with your local building codes and regulations when
constructing the deck.
DO NOT USE GREEN PRESSURE TREATED WOOD WITH CANADADOCKS™
FRAMES, the preservative reacts with aluminum frames.
Anchoring is REQUIRED. All docks must be anchored at the furthest point from shore to prevent damage
during storms. The amount of anchoring is determined based on the currents/wave size on the body of water.
Using an “X” pattern for chains under dock is recommended (see image 2,3).
If anchoring a Standing Dock, attach Chain Retainer (L) to inside leg as shown (see Figure 1). Slide
chain through key hole in Chain Retainer (L) and pull down to lock into position. If anchoring a Floating Dock,
attach chains to Eye Bolts as shown (see image 3, 4).
For further information on anchoring floating docks see Floating Dock instructions in dock package or at
www.canadadocks.ca/assembly-instructions
PLEASE NOTE: Chain Retainers (L) must be purchased separately. Eye Bolts are supplied with floating dock kit.
L
2
3
1
WHICH TYPE OF DECKING WILL YOU APPLY TO YOUR DOCK?
DECKING OPTIONS
