CanadaDocks-Assembly-Instructions-Ver17 08/08/19
Manufactured by: CanadaDocks Inc. 3690 Adjala-Tecumseth Townline RR2 Beeton, ON, Canada L0G 1A0 | 1-877-434-0359 | www.canadadocks.ca
|
“Do-It-Yourself”
Aluminum Docks
Canada
Docks
TM
Canada
Docks
.
ca
TM
Page 10
25
26
Ensuring the float is secure (use clamps to keep float in position if necessary). Use a magic marker to create a mark between the slots of
the float onto the truss frame. Using the reference above mark off every point shown.
8x8
4x8
Using the marks on the truss frame created in step 25 as your location guide drill holes on each mark. PLEASE NOTE: It may be necessary
to remove the float to drill depending on the clearance of your drill. Be careful not to drill too closely to any joist screws as it will interfere
with assembly of floats to dock.
13/32” DRILL BIT
