After entering the configuration page, click the drop-down menu of Work Mode, select Power Mode and input the level to
be set, as shown in the figure:
27
Click the
button to save the configuration, as shown in the figure:
Save the configuration and click the
button to restart, as shown in the figure:
After restarting, the Power Mode configuration is complete. You can check whether the configuration is successful
through the Workmate parameter in the Log. If the parameter is displayed as 2, the configuration is successful, as shown
in the figure:
2. Configure the Power Mode through FMS
Open FMS, check the mining machine to be configured, and click the
button, as shown in the figure:
