63
ITALIANOITALIANO
Manuale di istruzioni per installazione-uso-manutenzione
▪
Ed. 11/2019 Rev. 00
passo
azione
immagine
1
Aprire la nicchia di installazione, sbloccare la
base scorrevole (abbassando entrambe le leve
di sicurezza collocate all’estremità di ciascuna
guida) ed estrarre l’apparecchiatura.
2
Proseguire con l’estrazione del prodotto fino
al raggiungimento della posizione di finecorsa:
le guide si bloccheranno automaticamente
ed impediranno qualsiasi tipo di scorrimento
involontario della base scorrevole.
Sollevare il coperchio in vetro del prodotto.
3
Impugnare l’estremità libera del tubo gas flessibile
e collegare l’innesto rapido all’apposita presa
esterna omologata (come mostrato in figura).
L’accoppiamento corretto è accompagnato
dall’emissione di un ”click” meccanico.
Quindi, ruotare la manopola valvola di sicurezza
posta a controllo dell’innesto rapido ed
alimentare il dispositivo.
Per le versioni F, è sufficiente verificare la stabilità del prodotto quando è montato su gambe
e garantire un corretto collegamento dello stesso alla bombola del gas esterna.
USO
Prima di procedere al primo utilizzo, è necessario pulire accuratamente l’apparecchiatura e i
suoi componenti come indicato nel paragrafo “Pulizia” .
Durante i primi utilizzi, l’apparecchiatura potrebbe emettere fumo ed odori sgradevoli.
Non è necessario allarmarsi poiché ciò e dovuto alla combustione dei grassi utilizzati per la lavorazione in
fabbrica della stessa.
I bruciatori sono dotati di termocoppia di sicurezza.
La termocoppia è un dispositivo sensibile al calore: finché è riscaldata dalla fiamma del bruciatore
acceso, permette la fuoriuscita del gas dall’ugello; se la fiamma accidentalmente si spegne (es.
una fuoriuscita di liquido dalla pentola), la termocoppia in pochi secondi si raffredda e questo
blocca la fuoriuscita del gas dall’ugello.
uso
dei
bruciatori
/
comandi
gas
e
loro
simbologia
SPENTO
MAX
MIN
ACCENSIONE DEI BRUCIATORI
ATTENZIONE!
Prima dell’utilizzo verificare che gli spartifiamma, i cappellotti e le griglie siano correttamente
posizionati.
posizionamento
spartifiamma
In corrispondenza di ogni manopola è indicato il bruciatore associato.
L'accensione del bruciatore può essere:
▪
manuale
con utilizzo di accenditore esterno (sulle versioni S),
▪
piezoelettrica
con accenditore piezoelettrico ad azionamento meccanico/manuale (sulle versioni P).
Per
eseguire l'accensione del bruciatore
, procedere come descritto:
passo
azione
1
2
1
Premere e ruotare in senso antiorario (fino al
simbolo di massimo) la manopola corrispondente
al bruciatore che si desidera accendere.
2
Contemporaneamente, azionare il dispositivo di
accensione piezoelettrica con una serie rapida di
impulsi ripetuti o avvicinare allo spartifiamma un
accenditore manuale esterno.
3
Ad accensione avvenuta, mantenere premuta
a fondo la manopola per altri 5 secondi
(mantenendola sempre in corrispondenza
del massimo) e poi rilasciarla, procedendo
alla regolazione dell'intensità della fiamma
desiderata.
Nota:
questo ritardo nel rilascio serve al
riscaldamento della termocoppia di sicurezza.
Se al rilascio della manopola il bruciatore non rimanesse acceso, significa che la termocoppia non è stata
preriscaldata sufficientemente. Per ovviare al problema, ripetere le operazioni descritte in tabella, tenendo
premuta più a lungo la manopola dopo l’accensione del bruciatore.
Summary of Contents for SL Series
