PARTS TO BE INSTALLED
rbl2014-004-024_a
1. Antenna
2. Antenna base grommet
Hang Tag and Safety Labels
This vehicle comes with a hang tag and labels
containing important safety information.
The
labels are considered permanent parts of the
vehicle and should not be removed. Hang tag is
to be removed by the owner only.
Any person who rides this vehicle should read and
understand all the information given on hang tag
and safety labels before riding.
Safety labels of several languages can be chosen
by customer, according to availability.
704904124
WARNING
The Spyder roadster is a different type of vehicle -
The Spyder roadster is a different type of vehicle -
it requires special skills and knowledge.
it requires special skills and knowledge.
Learn how the Spyder roadster is different.
Learn how the Spyder roadster is different.
Read
ead
the operator's guide (in the front storage compartment)
and watch the safety video.
Comple
omplete
a training course (if available),
practi
tice
, become
proficient with the controls, and get a proper license.
Refer
er
to the Safety Card before riding.
Always wear a helmet and riding gea
ear a helmet and riding gear.
With this type of vehicle, riders are exposed to more road risks
than in a car. Even skilled operators can be struck by other
vehicles or lose control. This vehicle will not protect you in a
crash.
Handling
andling limits and
limits and road
oad conditions
onditions
The Vehicle Stability System (VSS) cannot stop you from
losing control, flipping over, or falling off if you exceed this
vehicle’s limits. Know the limits for different road conditions.
Do not ride on ice, snow, or off road. Avoid puddles and running
water. This type of vehicle can hydroplane on water and slip on
gravel, dirt and sand covered roads. If you must go through
these road conditions, slow down.
This hangtag may only be removed by the customer.
704904124
Licence Plate
NOTE:
When a license plate needs to be installed
or replaced, ensure to install new damping pad
(P/N 293 740 028).
1. Remove existing plate on vehicle (if applicable).
2. Peal off backing of new damping pad.
rmo2008-002-509_a
1. Damping pad backing
3. Position new damping pad on vehicle plate sup-
port.
34 / 52
2014-1
PREDELIVERY
