PARTS TO BE INSTALLED
5. Connect fender light connector.
NOTE:
Make sure harnesses are properly secured
through cable grommet in upper suspension arm.
rbl2013-002-006_a
1. Fender light connector
rbl2013-002-009_a
1. Cable grommet
2. Harness bracket
6. Tighten fender support screws to specification.
rbl2013-002-008_b
1. M8 x 20 hexagonal flange screws
SPECIFIED TORQUE
Fender support
retaining screws
24 N•m (18 lbf•ft)
7. Ensure harness brackets are properly posi-
tioned when torque is applied.
8. Ensure cap for wheel hub nut is properly se-
cured to steering knuckle.
rbl2014-004-050_a
1. Check for harness bracket contact here
2. Wheel hub nut cap secure
9. Remove protection from suspension arms.
Windshield
1. Install spacers (from PDI kit) on windshield sup-
port as illustrated.
rbl2012-002-001_a
1. Windshield spacer
2. Align windshield on windshield support.
3. Install M6 x 20 Torx screws (from PDI kit) to
secure windshield.
28 / 52
2014-1
PREDELIVERY
