UNCRATING
rbs2010-012-010_a
1. Lower shock bracket hole
2. Lower shock anchor pin
rbs2010-012-004_a
1. Lower bracket hole
7. Secure shock absorber as follows:
7.1 Using the passenger grab handles, slightly
lift the rear of the vehicle by HAND to align
both bushings on lower bracket hole.
7.2 Install M10 x 140 hexagonal flange screw.
7.3 Install M10 elastic flange nut.
NOTICE
Apply specified torque to the hexag-
onal flanged screw, not the nut.
PART
SPECIFIED TORQUE
M10 hexagonal flanged
screw
48 N•m (35 lbf•ft)
rbl2010-002-022_a
1. Shock absorber screw
2. Lower bracket
8. Install cap on ACS suspension manual inflation
valve.
rmo2010-001-056_a
1. Cap to install
RT-S and RT Limited Models
9. Install the link of the ACS position sensor on the
swing arm.
9.1 Position the ACS position sensor lever
rearward.
9.2 Place the link on the outside of swing arm
bracket.
9.3 Secure the link using M6 x 20 hexagonal
flange screw (from PDI kit)
PART
SPECIFIED TORQUE
M6 x 20 hexagonal
flange screw
4 N•m (35 lbf•
in
)
rbl2011-001-001_a
1. ACS position sensor lever
2. ACS position sensor link
3. M6 x 20 hexagonal flange screw
NOTICE
Ensure that ACS position sensor
lever orientation is correct.
12 / 52
2014-1
PREDELIVERY
