Can-Am RYKER 2023 Series, Operator'S Manual

Page: 151 / 222

149
7. Connect the other BLACK end to
the negative (-) terminal of the
booster vehicle battery.
8. Start your vehicle in the usual way;
if the engine does not start, wait a
few minutes before repeating the
attempt in order to protect the
starter motor and the booster
battery.
N NO OT TE E::
If it still does not start, there might be
a problem with the starting system.
Have the vehicle transported (see
Transporting the Vehicle in this sec-
tion) and repaired by an authorized
Can-Am On-Road dealer.
9. Once the vehicle has been started,
let run both engines to idle for a
few minutes before disconnecting
the jumper cables.
10. Remove the jumper cables in the
reverse order that they were
connected.
N NO OT TE E::
If the engine dies shortly after it has
been jump started or when the jumper
cables are disconnected, there might
be a problem with the charging sys-
tem. Have the vehicle transported
(see
Transporting the Vehicle section)
and repaired by the an authorized
Can-Am On-Road dealer.
11. Have the battery fully recharged
with a battery charger (see Mainte-
nance Procedures ) or by a quali-
fied service station as soon as
possible.
WHAT TO DO IN THE FOLLOWING CIRCUMSTANCES