Can-Am RYKER 2023 Series, Operator'S Manual

Page: 147 / 222

145
Engine air filter plugged or dirty.
– Check air filter and replace if
necessary.
– Check deposits in engine air filter
housing.
Drive and driven pulleys require
servicing.
– Contact an authorized Can-Am
On-Road dealer.
Engine overheats.
– Refer to Engine Overheats below.
Drive belt worn too thin.
– Replace drive belt. — If the drive
belt has lost more than 3 mm (1/8
in) of its original width, it will affect
vehicle performance.
Lack of fuel
– Dirty or clogged fuel pump pre-fil-
ter. Communicate with an author-
ized Can-Am On-Road dealer,
repair shop, or person of your own
choosing for an inspection and
repair.
If a passenger's seat kit is installed
and no passenger is present, the left
footpeg may be lowered.
– Raise and close the left passeng-
er's footpeg.
5 5.. E En ng giin ne e O Ovve errh he ea attss
Low coolant level in cooling system.
– Check coolant level and refill. See
Maintenance Procedures. Seek
service from an authorized Can--
Am On-Road dealer, repair shop,
or person of your own choosing for
maintenance, repair, or replace-
ment. For US and Canadian citi-
zens, please refer to the US EPA
Emission Performance Warranty
contained in the Warranty section
for information about warranty
claims.
Cooling fan is not working.
– Ensure cooling fan is not jammed
and working properly.
– Check fan fuse. See Fuse Loca-
tions in the Road Side Repairs
section.
Dirty radiators fins.
– Check and clean radiator fins. See
Cleaning the Radiator Fins in the
Maintenance Procedures section.
DIAGNOSTIC GUIDELINES