ENGINE LACKS ACCELERATION OR POWER (cont’d)
6. Engine is under a protection mode.
–
Check multifunction gauge display for messages.
–
Multifunction gauge CHECK ENGINE indicator lamp is on and display shows
CHECK ENGINE or LIMP HOME, contact an authorized Can-Am distributor/
dealer.
ENGINE BACKFIRE
1. Exhaust system leakage.
–
Contact an authorized Can-Am distributor/dealer.
2. Engine is running too hot.
–
See ENGINE LACKS ACCELERATION OR POWER.
3. Ignition timing is incorrect or there is an ignition system failure.
–
Contact an authorized Can-Am distributor/dealer.
ENGINE MISFIRE
1. Fouled/damaged/worn spark plug.
–
Clean/verify spark plug and heat range. Replace as required.
2. Water in fuel.
–
Drain fuel system and refill with fresh fuel.
VEHICLE CANNOT REACH FULL SPEED
1. Engine.
–
See ENGINE LACKS ACCELERATION OR POWER.
2. Parking brake.
–
Ensure parking brake is completely removed.
3. Air filter/housing plugged or dirty.
–
Check air filter and clean if necessary.
–
Check deposits in air filter housing drain.
–
Check the position of the air intake tube.
4. CVT dirty or worn-out.
–
Contact an authorized Can-Am distributor/dealer.
5. Engine is under a protection mode.
–
Check multifunction gauge display for messages.
–
Multifunction gauge CHECK ENGINE indicator lamp is on and display shows
CHECK ENGINE or LIMP HOME, contact an authorized Can-Am distributor/
dealer.
_____________________
91
Summary of Contents for Renegade 500
