CAUTION: Be careful not to dam-
age the radiating fins when clean-
ing. Do not use any object/tool that
could damage the fins. The fins are
purposely thin parts to allow effi-
cient cooling. WHEN HOSING, USE
LOW PRESSURE ONLY, NEVER USE
A HIGH PRESSURE WASHER.
See an authorized Can-Am distributor/
dealer to check the performance of the
cooling system.
Engine Coolant
Replacement
WARNING
In order to avoid potential burns,
do not remove the radiator cap or
loosen the coolant drain plug if the
engine is hot.
Open the front access panel and re-
move the radiator cap.
vmo2008-014-002_e
1. Radiator cap
Unscrew the coolant drain plug and
drain the coolant into a suitable con-
tainer.
vmo2006-007-021_a
1. Coolant drain plug
2. Brake pedal
NOTE:
Do not unscrew the coolant
drain plug completely.
Remove the RH side panel.
Unscrew the bleeding screw on the
top of thermostat housing.
vmo2006-007-022_a
1. Bleeding screw
Drain the system completely and rein-
stall the coolant drain plug.
Pinch hose between radiator and ther-
mostat housing with a large hose
pincher (P/N 529 032 500) or an equiv-
alent.
CAUTION: Do not use vise-grip pli-
ers to pinch hose.
_____________________
107
Summary of Contents for Renegade 500
