Can-Am DS 250 2023 Series, Operator'S Manual

Page: 87 / 172

85
– Visually check if any water is present into the vent hose of the gearbox, the
front differential and the rear final drive. Bring the vehicle to your authorized
Can-Am Off-road dealer for inspection and servicing if water is found.
– Clean shock absorber to prevent damage from dust or dirt.
– Clean the drive shaft bellows.
S Se evve erre e D Du ussttyy C Co on nd diittiio on nss
A Aiirr F Fiilltte err M Ma aiin ntte en na an ncce e G Gu uiid de elliin ne e
Air filter maintenance should be adjusted according to riding conditions.
Air filter maintenance must be increased in frequency in the following dusty
conditions:
–
Riding on dry sand
– Riding on dry dirt covered surfaces
– Riding on snow covered surfaces
– Riding on dry gravel roads or similar conditions.
Riding in a group under these conditions increases the frequency of the air filter
maintenance.
N NO OT TE E::
An accessory pre-filter should be used to avoid snow accumulation when the ve-
hicle is used in such conditions. Contact an authorized Can-Am dealer for
details.
M Ma aiin ntte en na an ncce e S Scch he ed du ulle e
Make sure to perform proper maintenance at recommended intervals as indi-
cated in the tables. Some items of the maintenance schedule must be performed
in function of the calendar, regardless of the distance or time of operation.
E Evve erryy 5 50 00 0 kkm m ((3 30 00 0 m mii)) o orr
2 25 5 h ho ou urrss ((w wh hiicch he evve err cco om me ess ffiirrsstt))
Perform all items indicated in the
Pre-Ride Inspection
Inspect and clean air injection valve filter (more often under dusty conditions)
Inspect wheel nuts/studs
Inspect tie-rod ends
Inspect ball joints
Inspect brake fluid
Inspect parking brake cable. Adjust if needed.
Inspect brake pads (more often under severe use such as in dusty areas,
sand, snow, wet or muddy conditions)
MAINTENANCE SCHEDULE