Can-Am 2007 Mini DS90 Operator'S Manual Download | Manualshive

Page: 120 / 144

background image

BRP LIMITED WARRANTY USA AND CANADA: 2011
CAN-AM

TM

ATV

1) SCOPE OF THE LIMITED WARRANTY

Bombardier Recreational Products Inc. (“BRP”)* warrants its 2011 Can-Am ATV
sold by authorized Can-Am ATV dealers (as hereinafter defined) in the fifty United
States and Canada from defects in material or workmanship for the period and
under the conditions described below. This limited warranty will become null and
void if: (1) the ATV was used for racing or any other competitive activity, at any
point, even by a previous owner; or (2) the ATV has been altered or modified in
such a way so as to adversely affect its operation, performance or durability, or
has been altered or modified to change its intended use.

All genuine Can-Am ATV parts and accessories, installed by an authorized BRP
dealer at the time of delivery of the 2011 Can-Am ATV, carry the same warranty as
that of the Can-Am ATV.

2) LIMITATIONS OF LIABILITY

THIS WARRANTY IS EXPRESSLY GIVEN AND ACCEPTED IN LIEU OF ANY
AND ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING
WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY OR FIT-
NESS FOR A PARTICULAR PURPOSE TO THE EXTENT THAT THEY CANNOT
BE DISCLAIMED, THE IMPLIED WARRANTIES ARE LIMITED IN DURATION
TO THE LIFE OF THE EXPRESS WARRANTY INCIDENTAL AND CONSE-
QUENTIAL DAMAGES ARE EXCLUDED FROM COVERAGE UNDER THIS
WARRANTY SOME STATES/PROVINCES DO NOT ALLOW FOR THE DIS-
CLAIMERS, LIMITATIONS AND EXCLUSIONS IDENTIFIED ABOVE, AS A
RESULT, THEY MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU
SPECIFIC RIGHTS, AND YOU MAY ALSO HAVE OTHER LEGAL RIGHTS
WHICH MAY VARY FROM STATE TO STATE, OR PROVINCE TO PROVINCE.

Neither the distributor, any BRP dealer nor any other person has been authorized
to make any affirmation, representation or warranty regarding the product, other
than those contained in this limited warranty, and if made, shall not be enforceable
against BRP.

BRP reserves the right to modify this warranty at any time, being understood that
such modification will not alter the warranty conditions applicable to the products
sold while this warranty is in effect.

3) EXCLUSIONS – ARE NOT WARRANTED

The following are not warranted under any circumstances:

– Normal wear and tear;
– Routine maintenance items, tune ups, adjustments;
– Damage caused by failure to provide proper maintenance and/or storage, as de-

scribed in the Operator's Guide;

118

______________

«
...
118
119
120
121
122
...
»

Summary of Contents for 2007 Mini DS90

















































































































































Reviews:

No comments

Related manuals for 2007 Mini DS90

Can-Am Maverick Sport X mr 1000R

Brand: BRP Pages: 192

LEXION 770 2016

Brand: Claas Pages: 48

Brand: Craftsman Pages: 80

PROWLER 500 2018

Brand: Textron Pages: 60

Brand: Yamaha Pages: 32

Brand: Yamaha Pages: 42

Brand: Yamaha Pages: 130

Brand: Yamaha Pages: 136

Brand: Yamaha Pages: 132

YFB250K Timberwolf

Brand: Yamaha Pages: 159

Brand: Yamaha Pages: 214

Brand: Humbaur Pages: 56

Brand: YBIKE Pages: 12

Brand: Yamaha Pages: 92

Brand: Bad Boy Pages: 152

MINI BAJA DUNE65

Brand: Baja motorsports Pages: 8

Brand: Kubota Pages: 112

Brand: Jeep Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands