Can-Am 2007 Mini DS90 Operator'S Manual Download

Page: 42 / 144

RIDING THE VEHICLE

ITEMS TO BE

INSPECTED

INSPECTION TO PERFORM

✔

Seat

Ensure operator seat is properly installed and latched.

Service and storage

compartments

Check if service and storage compartments are properly
latched.

Chassis and

suspension

Check underneath vehicle for any debris on chassis or
suspension, properly clean chassis and suspension.

What to Do Before Starting the Engine (Key ON)

ITEMS TO BE

INSPECTED

INSPECTION TO PERFORM

✔

Check operation of engine oil/temperature indicator lamp
(during first few seconds of key ON).

Indicator lamps

Ensure the N (neutral) and R (reverse) indicator lamps
come ON as applicable to transmission lever selection.

Check operation and cleanliness of headlights and taillight.

Check operation of high and low beam.

Lights

Check operation of brake light.

Engine

Ensure fuel valve is selected to the ON position.

What to Do After the Engine is Started

ITEMS TO BE

INSPECTED

INSPECTION TO PERFORM

✔

Indicator lamps

Ensure engine oil/temperature indicator lamp is off (shut
engine off if light remains on).

Transmission lever

Check operation of transmission lever (F, N, and R).

Brakes

Drive forward slowly a few feet and apply all brakes
individually to test them. The brakes must fully apply.
Lever and pedal must fully return when released.

Emergency engine

stop switch

Check that the emergency engine stop switch is working
properly.

Ignition switch

Check if ignition switch is working properly by restarting
and stopping the engine.

_______

SAFETY INFORMATION

________

Summary of Contents for 2007 Mini DS90

















































































































































Search results

Summary of Contents for 2007 Mini DS90

Reviews:

Related manuals for 2007 Mini DS90

Brands by name

Popular brands

Can-Am 2007 Mini DS90, Operator'S Manual

Search results

Summary of Contents for 2007 Mini DS90

Reviews:

Related manuals for 2007 Mini DS90

Brands by name

Popular brands