Can-Am 2007 Mini DS90 Operator'S Manual Download | Manualshive

Page: 125 / 144

background image

BRP INTERNATIONAL LIMITED WARRANTY: 2011
CAN-AM

TM

ATV

1) SCOPE OF THE LIMITED WARRANTY

Bombardier Recreational Products Inc. (“BRP”)* warrants its 2011 Can-Am
ATV sold by Can-Am ATV distributors or dealers authorized by BRP to distribute
Can-Am ATVs ("Can-Am ATV Distributor/Dealer") outside of the fifty United States,
Canada and states that are members of the European Economic Area ("EEA")
(which is comprised of the member states of the European Union plus Norway,
Iceland and Liechtenstein) from defects in material or workmanship for the period
and under the conditions described below.

All genuine Can-Am ATV parts and accessories, installed by an authorized Can-Am
ATV Distributor/Dealer at the time of delivery of the 2011 Can-Am ATV, carry the
same warranty as that of the Can-Am ATV.

This limited warranty will become null and void if: (1) The ATV was used for racing
or any other competitive activity, at any point, even by a previous owner; or (2)
the ATV has been altered or modified in such a way so as to adversely affect its
operation, performance or durability, or has been altered or modified to change its
intended use.

2) LIMITATIONS OF LIABILITY

THIS WARRANTY IS EXPRESSLY GIVEN AND ACCEPTED IN LIEU OF ANY
AND ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING
WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE TO THE EXTENT THAT THEY
CANNOT BE DISCLAIMED, THE IMPLIED WARRANTIES ARE LIMITED IN
DURATION TO THE LIFE OF THE EXPRESS WARRANTIES INCIDENTAL
AND CONSEQUENTIAL DAMAGES ARE EXCLUDED FROM COVERAGE
UNDER THIS WARRANTY SOME JURISDICTIONS DO NOT ALLOW FOR
THE DISCLAIMERS, LIMITATIONS AND EXCLUSIONS IDENTIFIED ABOVE,
AS A RESULT, THEY MAY NOT APPLY TO YOU. THIS WARRANTY GIVES
YOU SPECIFIC RIGHTS, AND YOU MAY ALSO HAVE OTHER LEGAL RIGHTS
WHICH MAY VARY FROM COUNTRY TO COUNTRY.

Neither the Can-Am ATV Distributor/Dealer nor any other person has been autho-
rized to make any affirmation, representation or warranty regarding the product,
other than those contained in this limited warranty, and if made, shall not be
enforceable against BRP.

BRP reserves the right to modify this warranty at any time, being understood that
such modification will not alter the warranty conditions applicable to the products
sold while this warranty is in effect.

3) EXCLUSIONS – ARE NOT WARRANTED

The following are not warranted under any circumstances:

– Normal wear and tear;
– Routine maintenance items, tune ups, adjustments;

______________

123

«
...
123
124
125
126
127
...
»

Summary of Contents for 2007 Mini DS90

















































































































































Reviews:

No comments

Related manuals for 2007 Mini DS90

Brand: ShoreLand'r Pages: 11

Brand: MANCO Pages: 16

GRIZZLY 700 2014

Brand: Yamaha Pages: 176

Brand: Yamaha Pages: 174

Formula Mx 1988

Brand: BOMBARDIER Pages: 62

traxter max series

Brand: BOMBARDIER Pages: 174

outlander max 800

Brand: BOMBARDIER Pages: 160

Brand: BOMBARDIER Pages: 282

Brand: Yamaha Pages: 60

DRIVE 2 SUPER HAULER 2019

Brand: Yamaha Pages: 60

Brand: Polaris Pages: 68

2004 TRX450FM Fourtrax Foreman

Brand: Honda Pages: 244

Brand: Jacobsen Pages: 64

Indy 340 Deluxe 2000

Brand: Polaris Pages: 52

2012 RANGER RZR 570

Brand: Polaris Pages: 403

Brand: Taylor-Dunn Pages: 130

Brand: swaploader Pages: 93

Brand: swaploader Pages: 106

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands