Tel: 01246 571 020 Fax: 01246 571 030
Email: [email protected]
Tel: 01246 571 020 Fax: 01246 571 030
Email: [email protected]
2.5” Inlet
15
Unpacking
The GV336 vacuum is shipped in one carton.
Additional to the machine in the carton will be ( if ordered ) either a standard tool kit or
full tools kit. 1 x 2.5” Standard Tool Kit (includes 1 x 2.5” diameter x 2.5m Long Flexible
Hose, 1 x Extension Tubes (pair), 1 x Utility Nozzle (square tool) and 1x Crevice Tool.
A 2.5” Full tool kit comprises of a 2.5” standard tool kit plus 1 x 2.5” floor tool and 1 x
2.5” round dusting brush.
Setting Up Your Vacuum
Since the unit comes completely assembled, it is very simple to put into operation.
The following steps should be taken after unpacking:
1. Ensure that the elasticised drum filter is in place around the top lip of the drum.
2. Replace lid and lock with toggle clamps.
3. Slip flexible hose into the intake opening.
4. Your vacuum is ready for use.
Motor
The vac motor supplied is a highly efficient, ball bearing type design for intermittent use
and DRY pick up only. Standard rating is for 230/240V, operating on a 50/60 cycles AC
supply and developing 1.3 HP/ 1100W. Each motor is rated at 1kW and will require to be
turned off for 10-15 minutes after 2 hours of use.
Fuse ratings are as follows: - 1000W ( single motor ) = 7Amp. 2000W ( twin motor )
= 9 or 10 Amp.