Tel: 01246 571 020 Fax: 01246 571 030
Email: [email protected]
1. Safe Operation
• Floor standing dust extractors should be positioned on a level floor. Ensure that there is
no debris between the base of the extractor and the floor.
• Wall mounted dust extractors, or those used with an optional wall mounting bracket,
should be fixed to a solid block or brick wall using suitable fixings that will withstand
the weight of the machine. If fixing to a studded wall, care should be taken to locate the
fixings in to the studding of the wall. Plasterboard alone is not strong enough to withstand
the weight of the machine.
• When wall mounting the dust extractor always consider it’s gross weight when full of
waste in order to select the correct type of fixings.
• Never place the dust extractor on a raised surface or workbench.
• In all cases, position the dust extractor as close as possible to the application it is to be
used for.
• It may be necessary to increase the length or reduce the diameter of the extraction hose
to suit the application. Never over stretch the hose to make it reach.
• The strength of suction alone may cause the dust extractor to be pulled in the direction
of the hose, particularly if the hose has been over stretched or if an optional wheel
kit is fitted. Never stand directly between the dust extractor and the machine that it is
connected to.
2. Familiarise yourself with the machine
• If you are not thoroughly familiar with dust extractors, be aware of the inherent risks due
to the way in which these machines work. There are moving parts inside the machine
that can cause serious injury. Always strictly follow any safety instructions detailed in the
manual when using, emptying or servicing the machine.
3. Before switching the machine ‘ON’:
• Remove the transit strap, which is used to secure the lid assembly to the drum body,
before use. Never use the machine with this strap fitted as it is designed purely to protect
the machine during transit.
• Ensure that the switch of the machine is in the ‘OFF’ position before connecting or
disconnecting the power supply.
• Ensure that the extraction hose is securely fitted to the outlet of the dust extractor.
• Always ensure that the cartridge and paper filter are securely and correctly positioned
before using the dust extractor. Failure to do so will result in dust being sucked into the
motor. Always ensure a good seal between the filter and motor enclosure.
• Check that the drum filter is in place (certain models only) before replacing the lid of the
machine.
• Check that the dust collection bag (certain models only) is secure and not damaged.
If damaged, replace the collection bag before starting the machine.
Additional Health & Safety for High
Filtration Dust Extractors
10