UT10 Weather Station
1. General
This section provides preparation and siting information as well as
specifications.
1.1 Installation Tasks
1.1.1 Indoors
•
Immediately upon receipt of your shipment…
⇒
Open shipping cartons.
⇒
Check contents against invoice. Contact Campbell Scientific
immediately about any shortages.
•
Several days prior to the planned installation date…
⇒
Collect tools and site information (Section 1)
⇒
Assemble datalogger, communications device, and power supply in
enclosure (Section 3)
⇒
Install datalogger support software on PC (Section 5)
⇒
Establish communications between the datalogger and the PC
⇒
Program datalogger, test sensors, and retrieve data
⇒
Trial run the tower / tripod installation, assembling as much as
possible (Section 2)
⇒
Repackage equipment for transport to the field site
1.1.2 Outdoors
•
Locate suitable site (Section 1)
•
Prepare tower base (Section 2)
⇒
Raise tower (Section 2)
⇒
Install instrumentation enclosure (Section 3)
⇒
Install sensors (Section 4)
1
