Campbell PVS5120 Series, Instruction Manual

Page: 21 / 102

PVS5120-Series Portable Samplers
9
6.
Device Configuration Utility
Overview
Device Configuration Utility
(
DevConfig
) software version 2.09 or higher is
used to configure the sampler controller (VSC100). The following sections
introduce the tabs and settings within the VSC100 portion of DevConfig .
Please see Section 8 , Operation
(p. 26)
, to step through specific control types/
scenarios. This section is meant to introduce a new user to each setting in
detail.
To use DevConfig , the sampler needs to be powered and the VS100 controller
needs to be connected to a PC via the
#
17648 USB cable (FIGURE 6-1 ).
FIGURE 6-1. VSC100 and 17648 USB cable
6.1 Connecting to the VSC100/Sampler via
DevConfig
1. Connect the 17648 USB cable to the front of the sampler controller
(VSC100) and the other end to the computer’s USB port (FIGURE 6-1 ).
Wait for Windows® to install the driver before opening
DevConfig
.
2. Open
DevConfig
. Select VSC100 Series under Sampler . Click
Communication Port and select the correct Communications Port .
Click Connect (FIGURE 6-2 ).