Campbell CS650, User Manual

Page: 27 / 56

User Manual
15
8.1.2.1 Settings Editor Tab
The Settings Editor tab shows settings stored in the CS650 firmware. Settings
that may be modified include User Name , SDI-12 Address , and RS-232 Baud
Rate . Attempts to change any of the other settings will result in a “Commit failed.
Unrecognized error condition” error message.
DevConfig polls the CS650 every
two seconds while connected and the results are displayed in the Real-Time
Measurements field (Table 8-2 ). This is useful for verifying probe performance.
Default communication settings are 9600 baud, no parity, 1 stop bit, 8 data bits,
and no error checking. After any changes to CS650 settings, select
Apply to write
the changes to the CS650 firmware. A configuration summary is then shown.
The summary may be printed or saved electronically for future reference.