CS451/CS456 Submersible Pressure
Transducer
1. Introduction
The CS451/CS456 Submersible Pressure Transducer provides pressure and
temperature measurements. It uses the SDI-12 or RS-232 communications
protocols to communicate with an SDI-12 or RS-232 recorder simplifying
installation and programming. The -L in the transducer’s model name
indicates user-specified cable length.
Before using the CS451/CS456 please study
•
Section 2,
Cautionary Statements
•
Section 3,
Initial Inspection
•
Section 4,
Quickstart
2. Cautionary Statements
•
Sensor will be damaged if it is encased in frozen liquid.
•
Although the CS451/CS456 is rugged, it is also a highly precise scientific
instrument and should be handled as such. There are no user-serviceable
parts and any attempt to disassemble the device will void the warranty.
•
Care should be taken when opening the package not to damage or cut the
cable jacket.
•
Dropping the instrument or allowing it to “free fall” down a well may
damage the transducer.
•
Never suspend the CS451/CS456 from the connections at the top end of
the cable. Sharp bends or excessive pinching of the cable can cause
damage and may pinch off the vent tube causing measurement errors.
•
Confirm the compatibility of the sensor and cable to non-water
environments before installation.
•
The CS456 should be used in harsh water applications, including salt
water.
3. Initial Inspection
•
Upon receipt of the CS451/CS456, inspect the packaging for any signs of
shipping damage and, if found, report the damage to the carrier in
accordance with policy. The contents of the package should also be
inspected and a claim filed if any shipping related damage is discovered.
1
Summary of Contents for CS451
Page 2: ......
Page 32: ...CS451 CS456 Submersible Pressure Transducer 26 ...
Page 34: ...Appendix A Calibration Certificate A 2 ...
Page 35: ......
