CS451/CS456 Submersible Pressure Transducer
The CS451/CS456 has two communication options: SDI-12 or RS-232. The
CS451/CS456 is shipped from the factory with both communications options
enabled; there is no configuration required. As an SDI-12 sensor, the
CS451/CS456 is shipped with an address of 0.
Two values are output by the CS451/CS456—pressure/level and temperature.
The CS451/CS456 is shipped from the factory to output pressure in psig and
temperature in degrees Celsius.
The CS451/CS456 has three nose cone options. FIGURE 5-1 shows the nose
cone options. The weighted nose cone makes the transducer easier to
submerge to depth. The NPT nose cone allows the transducer to be used in
closed-pipe applications. The nose cones can be switched out later.
Standard Nose Cone
Weighted Nose Cone
NPT Nose Cone
FIGURE 5-1. CS451 nose cone options
7
Summary of Contents for CS451
Page 2: ......
Page 32: ...CS451 CS456 Submersible Pressure Transducer 26 ...
Page 34: ...Appendix A Calibration Certificate A 2 ...
Page 35: ......
