Table 3-6: Originating IND MANT header settings
Setting
number
Setting
Description
[32/55]
Add destination
address
When enabled, the AL205E adds the destination address to the
ALERT2 packet. This value is only used if the default destination
address is enabled.
0 (default) = disable
1 = enable
[35/55]
Encrypt outgoing
packets
When enabled, the AL205E to encrypt the ALERT2 packet.
0 (default) = disable
1 = enable
[36/55]
Encrypt key
Sets the encryption key used to encrypt the packet. 16 byte key is
required.
[37/55]
Pending encrypt
key
Sets the encryption key used to encrypt the packet. This setting is
used in conjunction with the next setting to allow the entire
network to move to a new key all at the same time.
[38/55]
Pending encrypt
key effective date
Sets the effective data of the new encryption key. Pending
encryption key update time is set as a unix timestamp (seconds
since Jan 1, 1970, UTC). For example, Jan 1, 2021 at midnight UTC
is 1609459200.
[39/55]
EMID
When enabled, the AL205E send an
Ever-increasing Message ID
number as part of the encrypted ALERT2 packet.
0 (default) = disable
1 = enable
AL205E ALERT2 Encoder
11
