background image

Informaciones
Generales de Seguridad

Como el compresor de aire y otros
componentes usados (cabezales, pistolas
pulverizadoras, filtros, lubricadores,
mangueras, etc.), forman parte de un
sistema de bombeo de alta presión,
deberá seguir las siguientes medidas de
seguridad todo el tiempo:

1. Lea con cuidado todos los

manuales incluídos con este
producto. Familiarícese con
los controles y el uso
adecuado del equipo.

2. Siga todos los códigos de seguridad

laboral y electricidad establecidos en 

unidad en servicio. En caso de que haya
daños o falten piezas, sírvase llamar al 
1-800-543-8622 para obtener ayuda o
llame al Centro de Servicio Autorizado de
Campbell Hausfeld más cercano.

Se incluye una lista de las direcciones de
los centros de servicio. Tenga a mano el
número de serie, el número del modelo y
la lista de piezas (con las piezas que faltan
marcadas con un círculo) antes de llamar.

No debe 

utilizar la

unidad si se ha dañado durante el envío,
manejo o uso. Los daños podrían
ocasionar una explosión y ocasionarle
heridas o daños a su propiedad.

!

ADVERTENCIA

Sírvase leer y guardar estas instrucciones.Lea con cuidado antes de tratar de armar, instalar, manejar o darle

servicio al producto descrito en este manual. Protéjase Ud. y a los demás observando todas las reglas de

seguridad. El no seguir las instrucciones podría resultar en heridas y/o daños a su propiedad. Guarde este

manual como referencia.

17 Sp

Descripción

Los compresores sin aceite han sido
diseñados para una gran variedad de
trabajos domésticos y mecánica
automotriz. Estos compresores se utilizan
con pistolas rociadoras, llaves de impacto
y otras herramientas neumáticas. 

Estas

unidades funcionan sin aceite.

Medidas de Seguridad

Este manual contiene información que es
muy importante que sepa y comprenda.
Esta información se la suministramos
como medida de SEGURIDAD y para
EVITAR PROBLEMAS CON EL EQUIPO.
Debe reconocer los siguientes símbolos. 

Ésto le 
indica que

hay una situación inmediata que LE
OCASIONARIA la muerte o heridas de
gravedad.

Ésto le 

indica que

hay una situación que PODRIA ocasionarle
la muerte o heridas de gravedad.

Ésto le 
indica que

hay una situación que PODRIA ocasionarle
heridas no muy graves.

Ésto le 

indica una

información importante, que de no
seguirla, le podría ocasionar daños al
equipo.

Para Desempacar

Cuando desempaque la unidad,
inspecciónela cuidadosamente para
verificar si se han producido daños
durante el transporte. Asegúrese de
apretar todos los accesorios, pernos, etc.
que estén sueltos antes de poner la

AVISO

!

PRECAUCION

!

ADVERTENCIA

!

PELIGRO

Instrucciones para la Operacion

Serie WL6500 

IN610200AV 9/03

Advertencia sobre

el aire respirable

Este compresor/cabezal no viene listo de
fábrica para suministrarle aire respirable.
Antes de utilizarlos con este fin, deberá
instalarle un sistema de seguridad y alarma
incorporado a la línea. Este sistema adicional
es necesario para filtrar y purificar el aire
adecuadamente, para cumplir con las
especificaciones mínimas sobre aire
respirable de Grado D descritas en la
Especificación de Productos G 7.1 - 1966 de
la Asociación de Aire Compri-mido.
Igualmente, deberá cumplir los requisitos
establecidos por el Artículo 29 CFR 1910. 134
de la Organización norteamericana OSHA
y/o la Canadian Standards Associations
(CSA).

RENUNCIA A LAS GARANTIAS

Si el compresor se utiliza para producir aire
respirable SIN haberle instalado el sistema
de seguridad y alarma, todas la garantías se
anularán y la compañia Campbell Hausfeld
no asumirá NINGUNA responsabilidad por
pérdidas, heridas personales o daños.

!

PELIGRO

ALTO!

Registre en el espacio a continuación
el No. del Modelo, el Número de Serie
y la Fecha de Compra ubicados en la
base debajo de la bomb.

No. del Modelo ______________________

No. de Serie

______________________

Fecha de Compra ____________________

Guarde estos números para

referencia en el futuro.

Compresores 
Sin Aceite

¡NO DEVUELVA EL
PRODUCTO AL
MINORISTA!

MANUAL

8

WL6500 Series

Oilless Compressors

www.chpower.com

© 2003 Campbell Hausfeld/Scott Fetzer

Limited Warranty

1. DURATION: From the date of purchase by the original purchaser as follows: Standard Duty - One Year; Serious Duty - Two

Years; Extreme Duty - Three Years; Maxus Model Series - Five Years.

2. WHO GIVES THIS WARRANTY (WARRANTOR): 

Campbell Hausfeld / Scott Fetzer Company, 100 Production Drive, Harrison, Ohio, 45030, Telephone: (800) 543-6400

3. WHO RECEIVES THIS WARRANTY (PURCHASER): The original purchaser (other than for purposes of resale) of the Campbell

Hausfeld compressor.

4. WHAT PRODUCTS ARE COVERED BY THIS WARRANTY: Any Campbell Hausfeld air compressor. 
5. WHAT IS COVERED UNDER THIS WARRANTY: Substantial defects due to material and workmanship with the exceptions

noted below. 

6. WHAT IS NOT COVERED UNDER THIS WARRANTY:

A. Implied warranties, including those of merchantability and FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED FROM

THE DATE OF ORIGINAL PURCHASE AS STATED IN THE DURATION. If this compressor is used for commercial, industrial or
rental purposes, the warranty will apply for ninety (90) days from the date of purchase. Extreme Duty Contractor
Compressors and Maxus branded compressors are not limited to a ninety (90) day warranty when used in contractor
applications. Four cylinder single-stage and two-stage compressors are not limited to a ninety (90) day warranty when
used in commercial or industrial applications. Some States do not allow limitations on how long an implied warranty
lasts, so the above limitations may not apply to you.

B. ANY INCIDENTAL, INDIRECT, OR CONSEQUENTIAL LOSS, DAMAGE, OR EXPENSE THAT MAY RESULT FROM ANY DEFECT,

FAILURE, OR MALFUNCTION OF THE CAMPBELL HAUSFELD PRODUCT. Some States do not allow the exclusion or
limitations of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

C. Any failure that results from an accident, purchaser’s abuse, neglect or failure to operate products in accordance with

instructions provided in the owner’s manual(s) supplied with compressor.

D. Pre-delivery service, i.e. assembly, oil or lubricants, and adjustment.
E. Items or service that are normally required to maintain the product, i.e. lubricants, filters and gaskets, etc.
F. Gasoline engines and components are expressly excluded from coverage under this limited warranty. The Purchaser

must comply with the warranty given by the engine manufacturer which is supplied with the product.

G. Additional items not covered under this warranty:

1. All Compressors

a. Any component damaged in shipment or any failure caused by installing or operating unit under conditions not in

accordance with installation and operation guidelines or damaged by contact with tools or surroundings.

b. Pump or valve failure caused by rain, excessive humidity, corrosive environments or other contaminants. 
c. Cosmetic defects that do not interfere with compressor functionality.
d. Rusted tanks, including but not limited to rust due to improper drainage or corrosive environments.
e. Electric motors, check valves and pressure switches after the first year of ownership.
f. Drain cocks.
g. Damage due to incorrect voltage or improper wiring.
h. Other items not listed but considered general wear parts.
i. Pressure switches, air governors and safety valves modified from factory settings.

2. Lubricated Compressors

a. Pump wear or valve damage caused by using oil not specified.
b. Pump wear or valve damage caused by any oil contamination or by failure to follow proper oil maintenance

guidelines.

3. Belt Drive / Direct Drive / Gas Driven Compressors

a. Belts.
b. Ring wear or valve damage from inadequate filter maintenance.
c. Manually adjusted load/unload and throttle control devices.

7. RESPONSIBILITIES OF WARRANTOR UNDER THIS WARRANTY: Repair or replace, at Warrantor’s option, compressor or

component which is defective, has malfunctioned and/or failed to conform within duration of the warranty period. 

8. RESPONSIBILITIES OF PURCHASER UNDER THIS WARRANTY:

A. Provide dated proof of purchase and maintenance records.
B. Portable compressors or components must be delivered or shipped to the nearest Campbell Hausfeld Authorized Service

Center. Freight costs, if any, must be borne by the purchaser.

C. Use reasonable care in the operation and maintenance of the products as described in the owner’s manual(s). 

9. WHEN WARRANTOR WILL PERFORM REPAIR OR REPLACEMENT UNDER THIS WARRANTY: Repair or replacement will be

scheduled and serviced according to the normal work flow at the servicing location, and depending on the availability of
replacement parts. 

This Limited Warranty applies in the U.S., Canada and Mexico only and gives you specific legal rights. You may also have other
rights which vary from State to State or country to country.

Información
del modelo

Summary of Contents for IRONFORCFe WL6500 series

























Reviews: