CAMPAGNOLO Ekar 13S Rear Derailleur Page 10 Technical Manual Download

Page: 10 / 12

REAR DERAILLEUR - Rev. 00/ 09-2020

CAMPAGNOLO COMPONENTS - TECHNICAL MANUAL

4.3 - JOCKEY CAGE LOCK/UNLOCK BUTTON

If you have to remove the rear wheel, it is useful to be able to lock the jockey cage in the rearward position; follow the steps below

for locking and subsequent unlocking.

Fig.1

Fig.2

• LOCKING:

- Rotate the rear derailleur clockwise

(Fig. 1), until it locks into rearward posi

tion (Fig. 2). The jockey cage lock button

will engage automatically.

You can now follow the procedure for

removing the rear wheel.

Fig.3

• UNLOCKING:

- After following the rear wheel assem

bly procedure, rotate the rear derailleur

clockwise slightly and simultaneously

press the release button, accompanying

the rear derailleur back into the operating

position (Fig. 3).

Summary of Contents for Ekar 13S Rear Derailleur













Search results

Summary of Contents for Ekar 13S Rear Derailleur

Reviews:

Related manuals for Ekar 13S Rear Derailleur

Brands by name

Popular brands

CAMPAGNOLO Ekar 13S Rear Derailleur, Technical Manual

Search results

Summary of Contents for Ekar 13S Rear Derailleur

Reviews:

Related manuals for Ekar 13S Rear Derailleur

Brands by name

Popular brands