CAMPAGNOLO Ekar 13S Rear Derailleur Technical Manual Download

Page: 12 / 12

REAR DERAILLEUR - Rev. 00/ 09-2020

CAMPAGNOLO COMPONENTS - TECHNICAL MANUAL

6 - PERIODIC MAINTENANCE TABLE

PROCEDURE

MILEAGE IN KM

(MAX)

TIME

(MAX)

METHOD FOR CHECKING

Check screws are tightened

to the correct torque

PROCEDURE

MILEAGE IN KM

(MAX)

TIME

(MAX)

METHOD FOR CHECKING

Check screws are tightened

to the correct torque

Maintenance intervals are strictly approximate and may vary significantly in relation to the intensity and conditions of

use (for example: competitions, rain, winter roads with salt, weight of the athlete, etc.). Schedule the appropriate main

tenance with your mechanic.

Salty environments (such as winter roads or roads near the sea) may lead to galvanic corrosion of

most of the bicycle’s exposed components. To prevent damage, malfunctions and accidents, rinse, dry

and carefully re-lubricate all components which are subject to this phenomenon.

WARNING!

• Do not expose the products to high temperature, do not leave them closed in cars parked under the sun, do not keep them near

radiators or other heat sources, do not leave carbon or plastic products in direct sunlight.

Summary of Contents for Ekar 13S Rear Derailleur













Search results

Summary of Contents for Ekar 13S Rear Derailleur

Reviews:

Related manuals for Ekar 13S Rear Derailleur

Brands by name

Popular brands

CAMPAGNOLO Ekar 13S Rear Derailleur, Technical Manual

Search results

Summary of Contents for Ekar 13S Rear Derailleur

Reviews:

Related manuals for Ekar 13S Rear Derailleur

Brands by name

Popular brands