REAR DERAILLEUR - Rev. 00/ 09-2020
CAMPAGNOLO COMPONENTS - TECHNICAL MANUAL
8
Fig.16
• Cut the excess cable to about 2 cm
from the fixing screw and protect the end
of the cable with a cable protector.
• Position the rear derailleur on the smal
-
lest sprocket and check that the screw
(Fig.16) is correctly adjusted so that the
upper wheel is in line with the teeth of
the sprocket (Fig.17).
Fig.17
Fig.18
Fig.19
• The correct positioning of the upper
wheel is achieved as follows:
• Position the chain on the penultimate
sprocket, the one next to the largest
sprocket (Fig.19).
• Turn the screw (Fig. 20) that adjusts the
position of the rear derailleur.
Fig.20
!
Check that the screw (Fig. 18) is
correctly adjusted: when opera-
ting the rear derailleur control
with the chain on the largest
sprocket, the internal derailleur
rocker must NOT come into
contact with the spokes.
