background image

REAR DERAILLEUR - Rev. 00/ 09-2020

CAMPAGNOLO COMPONENTS - TECHNICAL MANUAL

3

13s REAR DERAILLEUR

1 - TECHNICAL SPECIFICATIONS

THIS TECHNICAL MANUAL IS INTENDED FOR USE BY PROFESSIONAL MECHANICS.

Anyone who is not a qualified professional for bicycle assembly must not attempt to install and operate on 

the components independently due to the risk of carrying out incorrect operations which could cause the 

components to malfunction, resulting in accidents, physical injury or even death. 

The actual product may differ from what is illustrated, as the specific purpose of these instructions is to 

explain the procedures for using the component.

2 - COMPATIBILITY

Combinations other than those shown in the tables could cause the drivetrain to malfunction and result in 

accidents, physical injury or death. 

The use of components that do not belong to the correct range can significantly reduce the overall 

performance of the drivetrain, and it is therefore advisable not to mix components from old ranges with 

those from the new one.

WARNING! 

REAR DERAILLEUR MAX SPROCKET

 (TEETH)

MIN SPROCKET

(TEETH)

EKAR 13s

44

9

REAR DERAILLEUR MAX SPROCKET

 (TEETH)

MIN SPROCKET

(TEETH)

EKAR 13s

44

9

13S REAR 

DERAILLEUR

13S ERGOPOWER 

CONTROLS

13S CHAIN

CABLES AND 

HOUSINGS

EKAR

EKAR

THE MAXIMUM 

SMOOTHNESS

MARKINGS

RD21-EK13

EP21-EKD13L4 / 

EP21-EKD13R4

C13

THE MAXIMUM 

SMOOTHNESS

RD21-EK13 (CF)

13S REAR 

DERAILLEUR

13S ERGOPOWER 

CONTROLS

13S CHAIN

CABLES AND 

HOUSINGS

EKAR

EKAR

THE MAXIMUM 

SMOOTHNESS

MARKINGS

RD21-EK13

EP21-EKD13L4 / 

EP21-EKD13R4

C13

THE MAXIMUM 

SMOOTHNESS

RD21-EK13 (CF)

Summary of Contents for Ekar 13S Rear Derailleur













Reviews: