24
ADJUSTMENTS
Angle of attack for rear track systems
To obtain the correct angle of attack on rear tracks systems,
perform the following :
Vehicles with rigid axle or trailing arm suspension
• Loosen the nut (1) compressing the spring of the
stabilizing rod (see Figure 8).
• Set the nut (2) to obtain a distance of 15-20 mm as
shown.
• Turn the nut (1) until it comes in contact with the spring,
then compress the spring by turning this nut 1.5 turns.
Figure 8
NOTE: Once the adjustments of the angle of attack on the rear systems
are completed, verify once again the adjustments to confirm.