20
ADJUSTMENTS
ADJUSTMENTS
Angle of attack for front tracks systems
NOTE: Before adjusting your kit, make sure the vehicle is on a hard
and flat surface like concrete. No lifting device should be
installed.
To obtain the correct angle of attack on front tracks systems,
perform the following :
• Loosen the nut (1) compressing the spring of the
stabilizing rod (refer to Figure 3).
Figure 3
IMPORTANT
Verifying your adjustments on the system is mandatory
after the first use of the vehicle, the track tension,
alignment and angle of attack of the each track systems
must be re-verified. Bad adjustments can decrease the
performance of the system and create premature wear of
certains components