MW8 & MotionWare User Guide: Issue 1.2.1
Page 18
3 The MotionWatch Manager
3.1 MotionWatch
Current Set-up
With the MotionWare Software already started, connect a
MotionWatch to the USB cable; the watch will
automatically be detected and the ‘MotionWatch Manager’
screen will be displayed as shown below:
If a MotionWatch is connected but the above screen is not
shown, click on the ‘Use MotionWatch’ button on the front
screen.
The MotionWatch Manager screen is automatically closed
when the MotionWatch is disconnected.
The MotionWatch setup options will be explained in detail
in the following section.
3 MAIN OPTIONS:
Setup Watch:
click to start a new
MotionWatch setup (Section 3.2)
Read Data:
click to download the data from
the MotionWatch (Section 4.1)
Exit:
Close the MotionWatch Manager
window.
CURRENT SETUP INFORMATION
Details of the current set-up stored in the
MotionWatch.
UTILITIES TAB
Click to view/edit advanced functions
(Appendix A)