MW8 & MotionWare User Guide: Issue 1.2.1
Page 13
the software in the default location. The operation of this
software on a remote server is not guaranteed as network
settings vary considerably. The MotionWare software
requires the Microsoft .Net Framework to be installed; the
installation wizard will check and install this if required.
This may result in a protracted installation procedure.
For USB driver installation see Section 2.4 Installing the
USB Drivers below.
2.3 Updating the
Software
If you are updating or reinstalling the software you should
first remove the old version. The installation has to then
be restarted by removing and re-inserting the CD ROM or
by double-clicking on the
‘SplashScreen.exe’ file.
2.4 Installing the
USB Drivers
This section on installing drivers only applies to new
installations.
The MotionWatch utilises generic Windows USB
drivers which are provided as part of the Windows
operating system.
To install the drivers, attach the supplied USB cable to
a free USB port and connect to the MotionWatch.
Depending upon the version of Windows, a sequence
of messages similar to that shown below will be displayed
at the bottom of the screen:
If prompted, you may be required to restart the PC.
The driver installation is now complete.
