MW8 & MotionWare User Guide: Issue 1.2.1
Page 15
2.7 MotionWare
Settings
Click on the Settings button
on the start-up screen to
open the MotionWare settings Window:
View or Enter Software Serial Number
Click this button to open the serial number entry window,
see
section 2.5
above
Set Institution Name
You may also choose to enter an institution name in the
settings window, which will then be included near the top
of all printed reports. This may be desirable if you wish to
hand the actogram or other reports directly to participants
after use.
Warn of Firmware Updates
New firmware (software that is programmed into the
MotionWatch) is sometimes provided within the software
update. Check the ‘Warn if new firmware available’
selection to be automatically notified if new firmware is
available.
It is recommended to check and update the MotionWatch
firmware following a software update
– see Appendix A2 -
Firmware Update
