LIGHT series
ENGLISH
2.3.6
0VUTJEFBJSJOUBLFT
$POTVMUUIFQJDUVSFTJOTFDUJPOTBOE
DBSFGVMMZ
The standards currently in force require that all appliances
be equipped with pipes of adequate dimensions to admit
into the
fi
rebox an outside air
fl
ow ensuring an e
ffi
cient and
complete combustion of wood.
For this appliance to function as a warm air generator with the
“Natural Convection” system and at the
same time to reinstate the oxygen burnt during combustion,
it has 4 (use just 2) 15 cm Ø external air intakes (for natural
convection, see
fi
gure 1) located at the back and on the sides
of the appliance and 2 intakes 12 cm Ø
Mount the two relevant sections of
fl
exible aluminium pipes
[A] in these intakes and secure them with 2 pipe collars.
Make two holes in the wall communicating with the outdoors
(or with a su
ffi
ciently aerated room) suitable for feeding the
relevant
fl
exible aluminium pipes (see
fi
gures 1 and 2).
Move the appliance, lifting or pushing it and sliding it on the
base of the fan box over suitable
fl
oor protection.
4JODFUIFBQQMJBODFJTWFSZIFBWZUBLFEVFQSFDBVUJPOT
JGNPWJOHPOXPPEøPPS
Place the appliance 12 cm away from the wall (or from the
protection masonry in case the walls are made of combustible
materials) and in the de
fi
nitive position (check the dimensions
of the cladding to install in order to determine the exact
position).
Lift the appliance back on the raising elements once and for all
and adjust its height and the levels by turning the adjustable
feet (using 10-mm spanner); the feet can also be accessed
from inside the appliance from under the hearth.
Insert the 2 aluminium lengths of
fl
exible pipe [A] into the
holes previously made and cut them in line with the outside
wall.
Mount the 2 PVC protection louvers on the afore-mentioned
pipes; safe operation and high performance are ensured by
using the air intakes supplied with the appliance.
*.1035"/5 $IFDL SFHVMBSMZ UIBU UIF BJS JOUBLFT BSF
OPUPCTUSVDUFE BøPXPGBJSPGDN
2
TIPVMEBMXBZT
CF HVBSBOUFFE UISPVHI FBDI MPVWFS GPS OBUVSBM
DPOWFDUJPO BQQMJBODFT BOE DN
2
GPS GPSDFE
DPOWFDUJPOBQQMJBODFT
The appliance, to intake air from outdoors, can also be
installed simply with just the primary air channelling. Apply
the intake under the appliance and insert the section of
fl
exible aluminium pipe [A] Ø 8 cm in it and secure with a pipe
collar.
Make two holes in the wall communicating with the outdoors
(or with a su
ffi
ciently aerated room) suitable for feeding the
relevant
fl
exible aluminium pipe Ø 8 cm and another of Ø 15
cm inside the drywall panel (see
fi
gure 3).
Once the appliance has been positioned correctly as just
described, insert the collector into the section of
fl
exible
aluminium pipe [A] and
fi
x it with the collar, then insert the
piep section into the hole made previously. Now mount the 2
PVC louvers, one on the
fl
exible pipe Ø 8 cm and the other on
the Ø 15 cm hole.
A
A
1
A
A
2
A
3