LIGHT series
ENGLISH
2.3.5
*OTUBMMBUJPOPGUIFFMFDUSJDBM
TMJEJOHNPUPSLJU
The “electrical sliding motor kit” (code 1530901000 optional,
available on price list) to control the opening of the sliding
door with radio control is reversible and can be installed both
on the right-hand and on the left-hand side of the appliance
as follows:
−
mount the connecting olt [P] on the motor kit,
open the 3 cm circular plate section on the aluminated
−
steel side,
fi
x the motor kit [M] on the appliance (using the holes on
−
the door) with the 4 screws at you disposal (NB: make sure the
connecting hexagons
fi
t together),
connect the electrical wiring to the power supply with
−
a bipolar switch to deactivate the motor kit in case of long
periods of inactivity.
Once the electrical sliding motor kit has been installed,
and before the
fl
are or the
fi
nishing drywall are made, it is
necessary to set the electronic control unit.
*.1035"/55IJTQSPDFEVSFIBTUPCFDBSSJFEPVUXJUI
UIF TMJEJOH EPPS LJU EJTDPOOFDUFE VTJOH UIF BE IPD
BWBJMBCMFCJQPMBSTXJUDIDPOOFDUBHBJOUIFVOJUUPUIF
QPXFSTVQQMZPOMZBGUFSUIFFMFDUSPOJDDPOUSPMVOJUIBT
CFFOTFU
In order to set the electronic control unit there are four
numbered switches with a function each; the switches can be
reached from the properly available opening on the side of
the motor kit (see
fi
gure 2).
The electronic unit leaves the factory with the following
settings:
4XJUDI/SiPòw
programming for installation on the left-
hand side.
4XJUDI/SiPòw
programming for appliances LIGHT 02 and
LIGHT 06.
4XJUDI/SiPòw
programming with beep tone deactivated.
4XJUDI /S iPòw
programming with automatic sliding
system deactivated.
−
Switch Nr. 1: it de
fi
nes the installation side.
Place the switch on “on” if the motor kit is installed on the
right-hand side of the appliance; leave it on “o
ff
” if it is installed
on the left-hand side.
−
Switch Nr. 2: it de
fi
nes the appliance model.
Place the switch on “on” if the appliance is LIGHT 01 or LIGHT
03; leave it on “o
ff
” if it is LIGHT 02 or LIGHT 06.
−
Switch Nr. 3: it activates or deactivates the beep tone of the
end of stroke.
Place the switch on “on” to activate the beep tone; leave it on
“o
ff
” to deactivate it.
−
Switch Nr. 4: it activates or deactivates the automatic
closure.
1MBDFUIFTXJUDIPOiPOwUPBDUJWBUFUIFBVUPNBUJDDMPTVSF
MFBWF JU PO iPòw UP EFBDUJWBUF JU 5IF BDUJWBUJPO PG UIF
BVUPNBUJD DMPTVSF BMMPXT GPS UIF DPNQMFUF PQFOJOH BOE
DMPTJOH PG UIF WFSUJDBM TMJEJOH EPPS CZ QSFTTJOH KVTU PODF
UIF PQFOJOH BOE DMPTJOH CVUUPOT PO UIF SBEJP DPOUSPM
PUIFSXJTF UIF CVUUPOT IBWF UP CF QSFTTFE DPOUJOPVTMZ
EVSJOHUIFPQFOJOHPSDMPTJOHPGUIFEPPS
%VSJOH UIF DPOTUSVDUJPO PG UIF QMBTUFSCPBSE XBMM
QMFBTFQSPWJEFGPSBGSPOUBM NJOYDNPSMBUFSBM
NJO Y DN EPPS JO PSEFS UP DBSSZ PVU BOZ
NBJOUFOBODFUPUIFNPUPSDPNQBSUNFOU<.>
P
M
1
M
2