manualshive.com logo in svg

Camille Bauer SIRAX BM1450, Operating Instructions Manual

Share
Download
Camille Bauer SIRAX BM1450 Operating Instructions Manual Download Page 4

PM 1001812 000 00 

Device handbook SIRAX BM1450 

4/36

1. Introduction

1.1 Purpose of this document

This document describes the universal, 4-channel DC meter SIRAX BM1450. It is intended to be used by:

 

•

Installation personnel and commissioning engineers

 

•

Service and maintenance personnel

 

•

Planners

Scope

This handbook is valid for all hardware versions of the BM1450. Some of the functions described in this doc-ument are available only, if the 
necessary optional components are included in the device.

Required knowledge

A general knowledge in the field of electrical engineering is required. For assembly and installation of the device knowledge of applicable national 
safety regulations and installation standard is required. 

1.2 Scope of supply 

 

•

Measurement device SIRAX BM1450

 

•

Safety instructions (multiple languages)

 

•

Connection set: 4 mounting clamps

1.3 Further documents

The following documents are provided electronically via www.camillebauer.com:

 

•

Safety instructions SIRAX BM1450

 

•

Operating Instructions SIRAX BM1450

 

•

Data sheet SIRAX BM1450 

 

•

Flyer SIRAX Monitor Line

2. Safety and Warnings notes 

Symbol

Meaning

 

Device may only be disposed of in a professional manner!

 

Caution! General hazard point. Read the operating instructions.
If the warning notice is not followed damage to property or severe personal injury may result.

Attention: Danger to life!
If the warning notice is not followed death or severe personal injury will result.

 

Please note
If the warning notice is not followed the device may be damaged or may not fulfill the expected functionality.

 

CE conformity mark. The device fulfills the requirements of the applicable EC directives. See declaration of conformity.  

 

Double insulation, device of protection class 2

CAT III

CAT II

Measurement category CAT III and CAT II for current / voltage inputs, power supply and relay outputs

Summary of Contents for SIRAX BM1450




































Reviews:

No comments

Brands by name

Popular brands

Load more brands