PM 1001812 000 00
Device handbook SIRAX BM1450
10/36
4.3.4 Timer screen
As shown in the picture above, there are upto four timer screens
present in measurement screens. They show values of number of
cycles, on delay and off delay for corresponding timer. When timer
is running, these values are shown in countdown mode.
are shown in countdown mode.
If number of cycles is set as 0, then on this screen number of cycles
will always increment from 0 up to 9999.
Note:
1. Press UP key to start the timer
2. Press down key to stop the timer
Timer unused:
Timer is not selected as a relay output
4.3.5 Number of Interruptions
This screen shows the number of power supply interruptions that
the meter has encountered. After 9999 this value will start it's
count from 0. User can reset this count in the reset menu.
4.3.6 On hour
This screen shows the total number of hours the auxiliary supply
has stayed on. Even if the Auxiliary supply is interrupted count of
on hour will be maintained in internal memory & displayed in the
“hhhhhh.mm” format. For example if displayed count is 105000.10
it indicates 105000 hours and 10 minutes. After 999999.59 On
hours display will restart from zero. The user can reset this value in
reset parameters menu.
4.3.7 Run hour
This Screen shows the total no. of hours each of the load has been
connected. Even if the Auxiliary supply is interrupted, count of
Run hour will be maintained in internal memory & displayed in the
format “hhhhhh.mm”.
For example if Displayed count is 105000.10 it indicates 105000
hours & 10 minutes. After 999999.59 run hours display will restart
from zero. The user can reset these values in reset parameters
menu.
