manualshive.com logo in svg

Camille Bauer SIRAX BM1450, Operating Instructions Manual

Share
Download
Camille Bauer SIRAX BM1450 Operating Instructions Manual Download Page 19

PM 1001812 000 00 

Device handbook SIRAX BM1450 

19/36

7.3 Timer Output

Timer output can be used to operate the Relay in a cyclic manner. The user can define the ON period and OFF period and also the number of 
times this cycle is to be repeated. The number of Cycles (N) can be indefinite or 1 to 9999.

8. Service, maintenance and disposal

For devices that have not been opened in the factory, no warranty or guarantee can be assumed.

8.1  Repair work and modifications

Repair work and modifications shall exclusively be carried out by the manufacturer. Do not open the housing of the device. In case of any tampe-
ring with the device, the guaranty claim shall lapse. We reserve the right of changing the product to improve it.

8.2 Calibration and new adjustment

Each device is adjusted and checked before delivery. The condition as supplied to the customer is measured and stored in electronic form.
The uncertainty of measurement devices may be altered during normal operation if, for example, the specified ambient conditions are not met.

8.3 Cleaning

The display and the operating keys should be cleaned in regular intervals. Use a dry or slightly moist cloth for this. 

Damage due to detergents

Detergents may not only affect the clearness of the display but also can damage the device. 
Therefore, do not use detergents.

8.4 Disposal

The disposal of devices and components may only be realised in accordance with good professi-
onal practice observing the country-specifi c regulations. Incorrect disposal can cause environ-
mental risks.

8.5 Return

All devices delivered to Camille Bauer Metrawatt AG shall be free of any hazardous contaminants (acids, lyes, solutions, etc.). Use original packa-
ging or suitable transport packaging to return the device.

Damage by returning

Damages caused by improper returning, no warranties or guarantees can be given.

9. Technical data

Inputs

Voltage input

Nominal input voltage: 

 

 

10 ... 60 V (Article-No. 177065)

 

 

 

 

 

61 ... 200 V (Article-No. 177073)

 

 

 

 

 

201 ... 1000 V (Article-No. 177081)

Max continuous input voltage:  

 

125 % of nominal value

Measuring range Voltage: 

 

 

± 

2 % ... 

± 

125 % of nominal value

Rated load voltage:   

 

 

< 0.4 W

Overload:  

 

 

 

> 126 % of nominal value

Max short-term input voltage:  

 

2 x nominal value (1s application 10 times in intervals of 10s)

Summary of Contents for SIRAX BM1450




































Reviews:

No comments

Brands by name

Popular brands

Load more brands