Commissioning and use during operation
Advanced Graphic Data Manager
106
Display in process screen
Switch the channel in the process-related graphic on or off.
Note:
This does not affect the process for storing the measured value or the
configuration.
Picklist:
no
, yes
Channel ident.
Specify whether the channel name should also be displayed in addition to the measured
value. The channel name is displayed above the measured value.
Picklist:
no
, yes
Alignment
Specify how the measured value should be aligned.
Picklist:
left-aligned
, right-aligned
x position
Select the x-position where the measured value should be displayed.
Note:
With "left-aligned", the x-position is the upper left-hand corner of the measured
value.
With "right aligned", the x-position is the upper right-hand corner of the measured
value.
User input: 0 to 799 pixel
y position
Select the y-position where the measured value should be displayed.
Note:
No measured values can be displayed in the area of the header and the softkeys/
status bar. Pay attention to the size of the font.
User input: 26 to 452 pixel
Font size
Select the font size to be used for displaying the measured value.
Picklist:
small
, medium, large, very large
Submenu: Edit, Accept changes
Saves the changes to the process-related graphic in the device memory.
Delete
Deletes the selected process-related graphic from the memory.
"Context menu"
menu items
Configurable parameters
(factory settings are highlighted in bold)