7
DMX
DEUTSCH
FRANCAIS
ESP
AÑOL
ENGLISH
IT
ALIANO
POLSKI
W-DMX™ STATUS
SETTING DMX START ADDRESS (DMX ADDRESS)
Press MODE to access the selection menu. Using the UP and DOWN controls, select the menu item “DMX address” (observe arrow) and
confirm with ENTER. The display will show a three-digit number field and you can use the UP and DOWN controls to configure the desired
DMX start address. Confirm the entry with ENTER and press MODE to return to the main display (in the example, “DMX address 001”).
---------------- Menu ----------------
DMX Address
DMX mode
Stand Alone
Slave
Settings
System Info
DMX Address
001
001
5xx
–
CONFIGURING DMX MODE (DMX Mode)
Press MODE to access the selection menu. Using the UP and DOWN controls, select the menu item “DMX Mode” (observe arrow) and
confirm with ENTER. In the sub-menu, you can now select between eight different DMX operating modes with the UP and DOWN buttons.
Confirm your selection with ENTER. Tables with the channel assignments can be found in these instructions under DMX CONTROL.
---------------- Menu ----------------
DMX Address
DMX Mode
Stand Alone
Slave
Settings
System Info
------------ DMX MODE ------------
15CH Full Access
10CH Full Access
8CH User-Calibrated
6CH Factory-Calibrated
4CH User-Calibrated
3CH Factory-Calibrated
3CH Color Macro
2CH CCT Factory-Calib
SETTING STANDALONE MODE
Press MODE to access the selection menu. Using the UP and DOWN controls, select the menu item “Stand Alone” (observe arrow) and
confirm with ENTER. In the sub-menu you can now select from the stand-alone modes “Auto”, “Color Macro”, “Static”, “Tunable White”, and
“User Color” with UP and DOWN. Confirm your selection with ENTER.
---------------- Menu ----------------
DMX Address
DMX mode
Stand Alone
Slave
Settings
System Info
----------------- Mode ----------------
Auto
Color Macro
Static
Tunable White
User Color
G3
G4S
W-DMX™
deactivated
W-DMX™
activated as
receiver,
not paired
W-DMX™
activated as
receiver and
is coupled to
device,
Transmitter is
switched off or
out of range
W-DMX
activated and
is coupled to
device,
no DMX signal
W-DMX™
activated as
receiver and
is coupled to
device,
DMX signal is
present
W-DMX™ and
transmission
mode G3 is
enabled
Up arrow =
Send operation
Arrow Down
= Receive
operation
Arrow flashes=
pairing process
Flashing stops =
paired
W-DMX™ and
transmission
mode G4S is
enabled
Up arrow =
Send operation
Arrow Down
= Receive
operation
Arrow flashes=
pairing process
Flashing stops =
paired
