11
DMX
DEUTSCH
FRANCAIS
ESP
AÑOL
ENGLISH
IT
ALIANO
POLSKI
SYSTEM INFORMATION (System Info)
Press MODE to access the selection menu. Using the UP and DOWN controls, select the menu item "System Info" (observe arrow) and
confirm with ENTER.
------------------- Menu ---------
----------
DMX Address
DMX mode
Stand Alone
Slave
Settings
System Info
Use the UP and DOWN controls to select the desired submenu item, and press ENTER to display the corresponding information.
linear
DMX value
Light intensity
exponential
DMX value
Light intensity
logarithmic
DMX value
Light intensity
S-curve
DMX value
Light intensity
Dimmer curves
System Info
Firmware
= Displays device firmware
Main CPU
Vx.xx
LED driver
Vx.xx
Temperature
= Displays temperature of LED unit
LED
xx°C / xx°F
Unit
°C (= display in degrees Celsius)
°F (= display in degrees Fahrenheit)
Operation Hours
= Displays operating time
xx:xx h
Displays total operating time in hours and minutes
MANUAL LOCKING FUNCTION
In addition to the ability to protect the lamp automatically from accidental and unauthorised operation (see "Settings" - "Auto-lock"), the con-
trols can also be locked manually. Press and hold the UP and DOWN controls simultaneously for approximately 5 seconds. If an attempt is made
to change settings, "Locked!" will appear in the display and changing the lamp’s settings via the controls is no longer possible. After approx. 1
minute, the current operating mode is displayed again. To unlock, press and hold the UP and DOWN controls simultaneously for approximately
5 seconds.
The display will show the previously displayed information.
IR Remote
= Activate or deactivate control
by IR remote control
On
IR remote control activated
Off
IR remote control deactivated
Fan
= Adjusts fan speed
Auto
Automatic fan speed control
Max Intensity
Maximum fan power for maximum brightness
Low Noise
deactivated fans with reduced brightness
Factory Reset
= Reset to factory settings
Reset Now!
Reset to factory settings:
Confirm with ENTER. Cancel with MODE
