85
DMX
DEUTSCH
FRANCAIS
ESP
AÑOL
ENGLISH
IT
ALIANO
POLSKI
MODO AUTÓNOMO DIRECT
De forma similar a la configuración con un equipo de control DMX, el modo autónomo Direct
permite ajustar las funciones de atenuación (Dimmer), estrobo (Strobe), blanco frío y blanco cálido
directamente en el equipo seleccionando valores entre 000 y 255. De esa forma, se podrá crear
un escenario personalizado sin necesidad de un equipo de control DMX adicional.
Partiendo de la pantalla principal, si pulsa MODE accederá al menú principal. Ahora, utilice los bo-
tones UP y DOWN para seleccionar la opción del menú
Stand Alone
y confirme con ENTER. Vuel-
va a utilizar los botones UP y DOWN para seleccionar
Direct
, confirme con ENTER y seleccione la
opción de menú que desea ajustar con los botones UP y DOWN. Confirme pulsando ENTER. Ajuste
el valor deseado entre 000 y 255 mediante los botones UP y DOWN y confirme todo con ENTER.
Direct Mode
Dimmer
Brillo
0 - 255
Strobe
Efecto de estrobo
0 - 5 = desactivado
6 - 255 = aprox. 1 Hz - 20 Hz
Cold White
Blanco frío
0 - 255
Warm White
Blanco cálido
0 - 255
MODO AUTÓNOMO CCT (CORRELATED COLOR TEMPERATURE)
En el modo autónomo CCT se puede ajustar la temperatura de color en pasos de 100 K desde
3100 K hasta 6500 K, además del brillo y un efecto de estrobo.
Partiendo de la pantalla principal, si pulsa MODE accederá al menú principal. Ahora, utilice los
botones UP y DOWN para seleccionar la opción del menú
Stand Alone
y confirme con ENTER.
Vuelva a utilizar los botones UP y DOWN para seleccionar
CCT
, confirme con ENTER y seleccione
la opción de menú que desea ajustar con los botones UP y DOWN. Confirme pulsando ENTER.
Ajuste el valor deseado mediante los botones UP y DOWN y confirme todo con ENTER.
CCT Mode
Dimmer
Brillo
0 - 255
Strobe
Efecto de estrobo
0 - 5 = desactivado
6 - 255 = aprox. 1 Hz - 20 Hz
CCT
Correlated Color
Temperature
3100 K - 6500 K