14
DMX
IT
ALIANO
POLSKI
ESP
AÑOL
FRANCAIS
DEUTSCH
ENGLISH
SYSTEM INFORMATION (System Info)
Starting from the main display, press on the right push button rotary encoder to move to the main menu. Rotate the left encoder (SELECT)
to select "System Info" menu item (as indicated by selector arrow on left) and confirm by pressing the left encoder (ENTER). Rotate the left
encoder to display the desired information (see chart).
System Info
Main CPU
Device firmware
LED Temp.
Displays the LED temperature in Celsius or Fahrenheit
Op. Hours
Cumulative operating time in hours and minutes
Display
Activates/deactivates display
DMX Fail
Operating mode if DMX signal is lost
Dim Curve
Dimmer Curve
Dim Response
Dimmer behavior
Red Shift
Activates/deactivates colour drift
PWM
LED PWM frequency
Calibr.
Factory default calibration / no adjustment / user defined adjustment
Colour-Cal. R
Adjusts red (independent of mode)
Colour-Cal. G
Adjusts green (independent of mode)
Colour-Cal. B
Adjusts blue (independent of mode)
Color-Cal. W
Adjusts white (independent of mode)
Autolock
Activates/deactivates automatic locking of the control element
Fan
Fan settings
MANUAL LOCK FUNCTION
While the option is available to have the spotlight lock itself automatically against unintentional or unauthorized use (see "Settings" - "Au-
tolock"), it is also possible to lock the controls manually. Press the center and right push button rotary encoders simultaneously for approx.
3 seconds. Any subsequent attempt to change the controls will display "Locked!" on the display and no further changes to the spotlight
settings can be made via the encoders. After approx. 1 minute the name of the currently set mode then returns. To unlock the controls, press
the center and right push button rotary encoders simultaneously for approx. 3 seconds. The display then returns to whichever information it
had been showing before the lock was applied.
linear
DMX value
Light intensity
exponential
DMX value
Light intensity
logarithmic
DMX value
Light intensity
S-curve
DMX value
Light intensity
DIMMER CURVES
Fan
= Fan setting
Constant Low
Constantly low fan speed with reduced brightness,
if necessary
Constant Medium
Constant average fan speed with reduced bright-
ness, if necessary
Constant High
Constant high fan speed
Factory Reset
=
Restore factory settings
(without resetting user
colours and loops)
Reset Now?
Reset to factory settings:
confirm with ENTER, cancel with ESC
UC/Loops Reset
=
Reset the user colours
and loops to factory
settings
Reset User Colors/
Loops
Reset to factory settings:
confirm with ENTER, cancel with ESC
