13
DMX
DEUTSCH
FRANCAIS
ESP
AÑOL
ENGLISH
IT
ALIANO
POLSKI
DEVICE SETTINGS (Settings)
Starting from the main display, press on the right push button rotary encoder to move to the main menu. Rotate the left encoder (SELECT) to select
"Settings" menu item (as indicated by selector arrow on left) and confirm by pressing the left encoder (ENTER). This will take you to the submenu
for setting the submenu options (see table, select via SELECT, confirm via ENTER, change value or status via SELECT, confirm via ENTER).
Settings
Display Flip
= Display rotation
Standing Position
No rotation of the display
Hanging Position
Display is rotated by 180° (e.g. for overhead installation)
Display Time off
= Display lighting
Display always on
Permanently on
Display off after 20s
Deactivates after approximately 20 seconds of
inactivity
DMX Fail
= Operational status with
DMX signal fault
Hold
Last command is retained
Blackout
Activates blackout
User Color 8
Activates User Colour 8
Dimmer Curve
= Dimmer curve
Linear
Light intensity increases linearly with DMX value
Exponential
Light intensity can be finely adjusted at lower DMX
values and broadly adjusted at higher DMX values
Logarithmic
Light intensity can be broadly adjusted at lower
DMX values and finely adjusted at higher DMX
values
S-Curve
Light intensity can be finely adjusted at lower and
higher DMX values and broadly adjusted at medium
DMX values
Dimmer Response
= Dimmer response
LED
Light responds abruptly to changes in DMX value
Halogen
Light behaves like a halogen spotlight with slight
brightness changes
Red Shift
=
Accurately mimics the
colour drift of dimming a
halogen spotlight. When
dimming the spotlight,
the colour temperature
changes automatically to
increasingly warm white
and amber (and vice
versa).
No
Colour drift is disabled
Dim To Warm
Colour drift is enabled
PWM-Frequency
= LED PWM frequency
600 Hz / 1200 Hz /
2000 Hz / 4000 Hz /
6000 Hz / 25k Hz
Configuration of LED PWM frequency
Color Calibration
= Colour calibration
RAW - Off
R, G, B and W with maximum value 255
RAW - Adjust
(Individuelle, betriebs-
artübergreifende
Anpassung von R, G,
B, und W mit Werten
von jeweils 000 bis
255)
Press middle encoder = switch between R+G and
B+W (colour) Rotate middle encoder = set value
of R or B
Press right encoder = one level up in menu
structure (ESC)
Rotate right encoder = set value of G or W
Press left encoder = confirm and save settings
Calibrated
Factory calibration of R, G, B and W (across all
modes). Select this setting for the correct display of
colour shades and presets in the standalone modes
CCT and Gel, as well as when controlling CCT and
the presets Gel via DMX.
Smart Calibration
Merge Factory (calibrated) and RAW calibration
Autolock
= Automatic locking of the
controls
On
Automatic locking of the controls after approxima-
tely 30 seconds of inactivity. Display shown upon
attempted use: “Locked!”
Unlock: Simultaneously press the centre and right
encoders for approx. 3 seconds
Off
Automatic locking of the controls is disabled
Fan
= Fan setting
Auto
Automatic fan control
Off
Deactivated fan with greatly reduced brightness
