P.
22
- M
an
u
al
c
od
e
31
9
U
3
4
31
9
U
3
4
ve
r.
1.
0
1.
0
0
9
/2
0
11 © C
A
M
E c
an
ce
lli
a
u
to
m
ati
ci
s
.p.
a.
- T
h
e d
ata a
n
d i
n
fo
rm
ati
on
in
th
is
m
an
u
al
m
ay b
e c
h
an
g
ed at a
ny ti
m
e w
ith n
o o
b
lig
ati
on
to n
otify s
ai
d c
h
an
g
es
.
ENGLISH
4 Description
2.1 Intended use
Legend of symbols
This symbol shows parts which must be read with care.
This symbol means the parts which describe safety issues.
This symbol tells you what to tell the end-user.
2 Conditions of use
The ZL170N control panel is engineered to command single 24 V DC powered gearmotors of the FERNI, EMEGA and FROG
series.
Any installation and use other than that specified in this manual is forbidden.
3 Reference standards
"IMPORTANT INSTALLATION SAFETY INSTRUCTIONS"
“WARNING: IMPROPER INSTALLATION MAY RESULT IN SERIOUS HARM. PLEASE FOLLOW ALL INSTALLATION INSTRUCTIONS”
“THIS MANUAL IS INTENDED ONLY FOR PROFESSIONAL INSTALLERS OR OTHER COMPETENT INDIVIDUALS”
2.2 Application settings
Engineered and built entirely by Came Cancelli Automatici
S.p.A.
The control panel should be powered by 230 V AC, at 50/60
Hz frequency.
The command devices and accessories are powered by 24V.
Warning! The accessories must not exceed 40 W overall.
All connections are protected by quick fuses, see table.
The transformer is fitted with a protection which, in case
overheating, keeps the gate leaf open. Reclosing will happen
only after the temperature has dropped below the overload
limit.
The card provides and controls the following functions:
- automatic closing after an opening command;
- pre-flashing movement indicator;
- obstacle detections when gate is not moving at any point;
- opening recoil:.
The available command modes are:
- opening/closing;
-opening/closing with maintained action;
- open only with radio command;
- total stop.
The photocells, after detecting an obstacle, may trigger:
- the reopening of the closing gate;
- a partial stop if gate is moving;
- a total stop.
The control panel features a safety amperometric sensor (see
p. 12).
Special trimmers regulate:
- the working time for automatic closing;
- adjusting amperometric sensitivity during while gate is
moving: min/max.
- adjusting amperometric sensitivity during deceleration:
min/max
- adjusting the stopping zone final stop (see p. 11)
You can also adjust the gate movement and deceleration
speeds (see p. 12).
You can also connect:
- gate open warning-lamp;
- electro lock.
- Movement flashing light.
- courtesy -lamp lighting the parking area for opening/closing
cycle.
- LB18 board to power gearmotors via batteries in case of
power outages. When power is back on it also recharges
them.
Came Cancelli Automatici employs an ISO 9001:2000 certified quality management system and an ISO 14001 environmental
management system. Came entirely engineers and manufactures in Italy.
This product is compliant with:
see statement of compliance.
The overall power load of the connected motor must not exceed 180 W.
F U S E TA B L E
to protect: fuses for:
Electronic board (line)
3.15 A-F
Command devices (control unit)
630 mA-F
Accessories
3.15 A-F
T E C H N I CA L DATA
line voltage 230V - 50/60Hz
power draw when idle 120 mA
maximum power for 24 V accessories 40 W
circuit insulation class
container material ABS
container protection rating IP54
working temperature -20 / +55°C
